- Full protection – comprehensive built-in protection
- Outdoor rating: IP65
- Wi-Fi
- Mobile data (LTE / 4G)
- Ethernet (wired network)
- Controllable from a mobile app
- RFID card start
OCPP – remote monitoring, Claudia™-compatible
22 kW, 3-phase
BENY Wall-mounted DC charger 22 kW with 1 connector(s)
SKU: BVDC 22
Made to order
Made to order at the factory, in the configuration you need. We’ll send you an exact price and delivery time within one business day.
Get a quote
Exclusive BENY distributor in HungaryFactory warranty, spare parts stocked in Hungary- Installation at a fixed priceBy our own electricians, at a final price after a site survey, with no extras added laterQuote with installation
- Service and maintenance in HungaryTroubleshooting, warranty repairs, periodic inspectionsService
- Claudia charge managementRemote monitoring, reports and billing over OCPPWhat is Claudia?
Fast DC charging mounted on the wall, where there's no room for a charging pedestal.
- power
- 22 kW
- range per hour, with an average car
- ~120 km
- dust and water resistance
- IP65
- cable length
- 5 m
Technical data
Question about a spec? Write to us and we’ll tell you whether it suits your car and your wiring.
Power and current8
- Power
- 22 kW
- Phases
- 3-phase
- Supply voltage
- AC380V-415V,3P+N+PE
- Input current
- 35A
- Output current
- 0~73.3A
- Output voltage
- CCS1/CCS2/GBT/NACS: 150 Vdc -1000 Vdc CHADEMO: 150 Vdc -500 Vdc
- Efficiency
- ≥95%
- Power factor
- ≥0.99 (at 100% load)
Connectivity and control8
- Connectors
- 1 × CCS2 – CHAdeMO, GB/T or NACS also available on order
- Cable length
- 5 m
- Charging points
- 1 charging points
- Start
- RFID, app
- OCPP
- yes
- Protocol
- OCPP 1.6J
- Communication
- Ethernet/4G/WIFI
- Display
- 5-inch LCD display / LED indicator
Housing and environment7
- Protection rating
- IP65 IK10 (display IK08)
- Operating temperature
- -30°C~+50°C
- Enclosure material
- galvanized steel sheet
- Cooling
- forced air cooling (separate air duct)
- Size
- 680*380*200mm (L×W×H)
- Weight
- ≤46.5 kg
- Installation
- wall, optionally on a post
Other and identifiers3
- Standards
- IEC 61851-21-2:2021; IEC 61000-6-2:2019; EN61000-6-4:2019; IEC 61851-1:2019; EN 61851-23:2014; EN 61851-24:2014
- Use
- indoor / outdoor
- SKU
- BVDC 22
Description
Low-power wall-mounted DC charger with a 5-inch display – for company sites, workshops and underground car parks that need something faster than AC charging but smaller than a large charging pedestal.
We have DC fast chargers built to order, configured for your site (connector type, cable length, payment terminal, grid connection). The quote can also include installation, grid preparation and commissioning.
Goes well with it
All accessories
Manufacturer and safety information
- Manufacturer
- Zhejiang Benyi New Energy Co., Ltd. Shuanghuanglou Industrial Zone, Beibaixiang Town, Yueqing City, Wenzhou, Zhejiang Province, China info@evb.com · www.evb.com
- Responsible economic operator in the EU
- ArtEffi Kft. 2481 Velence, Panoráma út 35/A. kapcsolat@helloenergia.hu
- Product identification
- BENY Wall-mounted DC charger 22 kW with 1 connector(s) Type: BVDC 22
- Safety information
- The charger may only be installed by an electrician, in line with current regulations and the manufacturer’s installation guide, with a suitable circuit breaker and RCD. Don’t use it if the housing, cable or connector is damaged. Don’t open or modify it; repairs may only be done by a qualified professional. Don’t pull the connector out by force while charging, and don’t coil the cable tightly. Keep away from children. Detailed instructions are in the Hungarian-language user manual supplied with the product.